Venturer HPS9308 - Manual (Page 92)

- 92 -
The ‘Route To’ button is for starting a new route only. For a single route you
tap this when the destination is selected. Multi-point routes can be created
after you have established a single route. Add points to the single route
by using the ‘Add Via’ and ‘Continue’ buttons. Applying ‘Route To’ again
will delete the whole route. In your case only single routes existed before,
so they were deleted without a warning message. If you already have a
multi-point route, Venturer GPS Navigation warns you before deleting the
whole route.
The speaker icon shows Venturer GPS Navigation is not muted yet I
hear no voice guidance.
The muting available from both map screens is just a quick silencer that
cancels the sound output. Voice guidance and key sounds need to be
enabled and volume must be set at the Sound Settings screen.
I enabled the speed warning as soon as I bought the product but I
have just been fined for speeding because Venturer GPS Navigation
failed to warn me.
For an accurate speed warning the actual speed limits of each street
and road must be present correctly on the map. This is a relatively new
feature of digital maps, so it may not be available in some countries, and
its accuracy still has much room for improvement (ask your local dealer for
the details in your region). This feature can help you in several cases but it
cannot be considered as serious speed control. That is why it can be turned
on and off separately from the reliable voice guidance.