Vista 0150-0267A - Manual (Page 25)

0150-0267A 4-3 Vista Solo
o Main Menu
→ Time/Date → Set Region
Use this menu option to set the region for the Auto
Daylight Savings Time feature. Choices are:
•
OFF: Clock will not be changed automatically.
•
USA: DST starts at 02:00 on the first Sunday in
April. DST ends at 02:00 on the last Sunday in
October. Includes: United States (except Hawaii,
American Samoa, Guam, Puerto Rico, Virgin
Islands, parts of Indiana and Arizona) and
Canada (except Saskatchewan).
•
EUR: DST starts at 01:00 GMT on the last
Sunday in March. DST ends at 01:00 GMT on
the last Sunday in October. Includes: European
Union Countries.
•
AUS: DST starts at 02:00 on the last Sunday in
October. DST ends at 03:00 on the last Sunday
in March. Includes: South Australia, Victoria,
ACT, NSW. Excludes: Tasmania.
Daylight Saving :
Time Zone :
SUN, 6 APR 2003 02:00 (+1)
SUN, 26 OCT 2003 02:00 (-1)
GMT+07:00
USA
Regional Settings
[CANCEL] [OK]
The clock will only be automatically adjusted once on a given time and date. If you manually set the
clock back before the last DST change, the time will not get automatically adjusted again for that same
time change.
4.2 Main Menu
→ Alarms
Alarms Menu
Hardwire Alarm : Enable
Alarm Buzzer : Enable
[CANCEL] [OK]
Use this menu to specify:
•
Whether an alarm condition will be activated when the
unit detects a signal on the Alarm In connection.
•
Whether the internal buzzer is activated during an
alarm condition.
4.3 Main Menu
→ Timer Settings
DATE START STOP SPD(pps) QUALITY ON/OFF
31
Sat
Mon-Fri
Sat-Sun
Mon-Sun
--
16:45
07:55
09:56
14:23
02:23
--:--
17:05
08:10
11:05
14:50
03:34
--:--
20
10
60
60
20
--
[OK]
High
Med
Low
High
Med
--
On
Off
On
On
Off
--
This menu allows the user to
program a timed-recorded
event. Use this menu to
specify:
•
The date, or days on
which the recording
will occur.
•
The start and stop
time.
•
The record speed.
•
The record quality.
•
Whether the event is
enabled.
EDIT Mode Hit "ENTER" To Toggle EDIT Mode