Vista 0150-0267A - Manual (Page 27)

0150-0267A 4-5 Vista Solo
Deleting a Timed Recording:
1. Using the Arrow buttons to navigate, highlight the ON/OFF parameter of the event you wish to
delete.
2. Press the Enter button to enter the Edit mode.
3. Use the Arrow buttons to select DEL from the menu.
4. Press the Enter button to confirm the selection and exit the Edit mode.
5. Use the Arrow buttons to navigate to [OK], then press the Enter button to remove the selection
and exit the menu.
4.4 Main Menu
→ Record Settings
Normal Record Speed
Alarm Record Speed
Video Quality
Use this menu to specify:
•
The record speed during Normal recording.
•
The record speed when the unit detects an alarm condition.
•
The recorded picture quality.
o Main Menu
→ Record Settings → Normal Record Speed
Normal Record Speed
Pictures Per Second
5
Use the Arrow buttons to select the desired Normal Record Speed.
Normal Record Speeds:
PAL: 50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1, 0.0.
When the Normal Record Speed is set to 0.0, the unit will only record
while an alarm is active.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.
o Main Menu
→ Record Settings → Alarm Record Speed
Alarm Record Speed
Pictures Per Second
60
Use the Arrow buttons to select the desired Alarm Record Speed.
Alarm Record Speeds:
PAL: 50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.