Venturer GB - 1 - Manual (Page 10)

GB - 9
connectionS
Watching a DVD on your tV
1. Connect your TV to the DVD Player using a standard AV Cable (not included).
2. Turn on the DVD Player.
3. Turn on the TV and follow the instructions included with it to play the DVD.
Note:
• Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak
signal.
• If your TV does not have Audio/Video inputs, you will need to purchase an RF modulator (sold separately)
and follow the instructions included with it to connect the unit to your TV.
B. connecting a tV (for the DVD Player only)
If your TV has Audio/Video inputs, you can connect the DVD Player to your TV using a standard AV cable
(not included).
a. Watching a DVD on the DVD Player and the Monitor
You can watch the same DVD on the DVD Player and the monitor.
Watching on the DVD Player and the Monitor
1. Connect the DVD Player and the monitor using the included DC-AV Cable.
2. Turn on the DVD Player and the monitor.
3. Play a DVD on the DVD Player; the monitor will play DVD at the same time.
Monitor -
left side right side
AV-DC cable
(included)
To A/V OUT &
DC IN 9V-12V
jacks
To A/V IN &
DC OUT 9V-12V
jacks
DVD player
right side
AV cable
(not included)
To A/V OUT jacks
TV
DVD player
right side