Viper 1100.5 - Manual (Page 5)

5
© 2002 Directed Electronics, Inc
High-powered car audio
systems may produce sound
pressure levels that exceed the
threshold at which hearing loss may
result.
They may also impair a driver’s ability to
hear traffic sounds or emergency vehi-
cles. Use common sense and practice
safe listening habits when listening to or
adjusting your audio system.
WARNING
FEATURES
„ Dual high-speed MOSFET switching
power supplies.
„ Complimentary bipolar outputs (ch
1-4), and high-current MOSFET
outputs (sub channel).
„ Five channel expandable architec-
ture supports single or multiple amp
system designs.
„ Thermal, DC offset, reverse polarity,
and short circuit protection with
status LED.
„ Top-mounted controls located under
illuminated Viper snake logo trim
piece.
„ Dual continuously variable 12
dB/octave two-way active
crossovers (ch 1-4).
„ Continuously variable 24 dB/
octave low-pass crossover (sub
channel).
„ Variable 24 dB/octave subsonic
filter and phase adjustment (sub
channel).
„ Remote subwoofer level control and
variable 12 dB bass EQ function.
„ Two, four, and six channel input
allows full access to source or
processor output functions.
„ Master/slave function allows
synced bridged or parallel operation
with model d600.1.
„ Summed stereo full-range RCA
output jacks.
„ Gold-plated screw-block plugs and
RCA jacks ensure maximum signal
transfer.
„ Rugged one-piece extruded heat
sink finished with injection-molded
mounting feet.