VIEWSONIC Wireless Presentation Gateway WPG-350 VS12526 - Manual (Page 45)

40
Channel Width Set channel width of wireless radio. Default setting is
‘Auto 20/40 MHz’.
Preamble Type Set the type of preamble of wireless radio, Default
setting is ‘Short Preamble’.
Broadcast Device
Name (SSID) Decide if the product will broadcast its own device name
or not. You can hide the device name of this product (set
the option to ‘Disable’)
CTS Protect Enable to reduce the chance of radio signal collisions
between 802.11b and 802.11g wireless access points. It’s
recommended to set this option to ‘Auto’ or ‘Always’.
Tx Power You can set the output power of wireless radio.
Turbo Mode Enhances the data transfer rate of network. Default
setting is “Enable”.
WMM Wi-Fi MultiMedia Quality of Service is a set of features for
Wi-Fi networks that improve the user experience for audio,
video, and voice applications by prioritizing data traffic. Default
setting is “Disable”.
Click ‘Apply’ button to save the settings.
NOTE: When the configuration settings are changed, you must restart the
network connection. You can restart the network connection by clicking
“Restart” on the main menu.
5-5-3 ‘Security’ Settings
5-5-3-1 Encryption: Disabled
Disables wireless encryption. Other people may intercept the content of
presentation if wireless data is not encrypted, and this will allow everyone to
connect to this product, unless 802.1x authentication is enabled.
WPG-350 ViewSonic