Vivitar ViviCam 3705 - Manual (Page 14)

14
Note:
Make sure to use only the AC power adapter specified for the camera. Damage caused by the use of an incorrect adapter is
not covered under the warranty.
Using an AC power adapter while transferring images to your computer prevents unexpected automatic power off of the
camera.
Inserting an SD Memory Card
(optional accessory)
The camera comes with 8MB of internal memory, allowing you to store images and video clips in the camera. However, you can
expand the memory capacity by using an optional SD (Secure Digital) memory card so that you can store additional images and
video clips.
1. Make sure the camera is turned off.
2. Slide the battery/SD memory card cover in the direction of the
[OPEN] arrow.
3. Insert an SD memory card:
The front side of the memory card (printed arrow) should
face towards the front side of the camera.
If the card cannot be inserted, check the orientation.
4. Close the battery/SD memory card cover.
To remove a memory card:
Make sure the camera is turned off. Open the battery/SD memory card cover. Press lightly on the edge of the memory card and it
will eject.
Note:
To prevent valuable data from being accidentally erased
from an SD memory card you can slide the write protect tab
(on the side of the SD memory card) to “LOCK”.
To save, edit, or erase data on an SD memory card, you
must unlock the card.
LOCK LOCK
Write-Protected
Tab
Write-Protected
State