Vivitar ViviCam 3705 - Manual (Page 43)

43
LCD Brightness
This option adjusts the brightness of the LCD display. To adjust the LCD brightness, press the button. Then increase or
decrease the LCD brightness by using the / buttons and press the button.
Burst
This function allows you to capture a sequence of continuous images (frames). If burst function is enabled, the image resolution
will be set to 1024x768 pixels. (To enable this function, press the button. Then select [On] by using the / buttons and
press the button.)
The approximate number of images you can capture capture varies according to the quality (compression) settings:
Super fine approx. 2
Fine approx. 4
Normal approx. 7
Of course, the remaining memory capacity will also affect the number of shots that can be captured. The average burst interval is
approximately 0.7 seconds. (1.4 fps)