Victor Technology V12 - Manual (Page 37)

V I C T O R T E C H N O L O G Y
37
Full Figure Display
To view all ten digits of a figure without decimal points touch b
. PREFIX
and hold down prefix as long as you wish to view the numbers.
Example
Convert 567.89 to scientific notation and then view the full figure with no
decimal points.
ENTRIES DISPLAY
567.89 ENTER
567.89
Displays the initial value
b . .
5.678900 02
Displays the figure in scientific notation
b PREFIX
5678900000
Displays all 10 digits with no decimal point
Other Display Settings
Error Display
If an improper function or operation is entered the calculator will display
ERROR on the screen, followed by a number (0-9). To clear the ERROR
message from the display screen, touch any key to return calculator to state
before improper command or entry was entered. The Errors are described in
the appendix.
PR ERROR
When power to the calculator is disrupted and restored the display shows PR
ERROR. This indicates continuous memory has been reset and all data,
program and status information have been lost.
Underflow and Overflow Display
If an value is calculated to be greater than 9.999999999 X 10 99 , the calculation
is disrupted and the display will read 9.999999 99 or –9.999999 99 (for either
positive or negative values)