Vivitar Vivicam 3715 - Manual (Page 33)

32
E
Step 1: Installing the USB driver on Windows computers
The USB driver on the supplied CD-ROM is exclusively for Windows 98. Installing
the USB driver on computers running Windows 2000/ME/XP is not necessary.
1. Insert the CD-ROM packaged with the cam-
era into the CD-ROM drive. The welcome
screen appears.
2. Click “Install USB Driver”. Follow the on-
s c r e e n i n s t r u c t i o n s t o c o m p l e t e t h e
installation. After the USB driver installation
is complete, restart your computer.
Installing the USB driver on Macintosh computers
Mac OS 8.6 users must install a USB driver. For Mac OS 9.0 or higher, the com-
puter will automatically recognize the camera and load its own USB drivers.
1. Insert the CD-ROM packaged with the camera into the CD-ROM drive.
2. Select and double-click “Digital Camera Driver Installer”.
3. Select “Install Location” and click “Install”.
4. Follow the on-screen instructions to complete the installation and restart your
computer.
Step 2: Connecting the camera to your computer
1. Connect one end of the USB cable to an avail-
able USB port on your computer.
2. Connect the other end of the USB cable to
the USB connector on the camera.
3. Turn the camera on.
4. Look for a new “removable disk” icon ap-
pearing in the “My Computer” window. Your
recorded images/video clips will be in a folder
on this “removable disk”. (For Mac users,
double-click the “untitled” disk drive on the
desktop.)