Vivitar ViviCam 3730 - Manual (Page 16)

Preparing to Take Pictures
12
Power Save Settings
You may perform power save setting in any Mode dial.
( )
1. Press Menu button.
2. Then press RIGHT button to SETUP MENU ( ).
3. Press DOWN button ( ) to POWER SAVE.
4. Press SET button to POWER SAVE menu.
5. Press UP/DOWN button for your new setting.
6. After your selection, press SET again to complete your setting.
Note: The default setting is “Off”.
1 minute: This camera will automatically turn off monitor screen if there is
no operation after one minute (the LED is on in Green.) Per-
forming any button will have the monitor screen to turn back on.