Vivitar ViviCam 3730 - Manual (Page 49)

45
Connecting Your Camera
Connecting your camera
Viewing Images on a TV Set
Images displayed on the camera’s monitor screen can also be displayed on
a television screen.
1. Use the video cable to connect the camera to the TV set as shown.
2. Perform the required operation on the VQ to obtain video input
3. Perform normal playback and recording operations on the camera.
NOTE:
The camera LCD screen turns off automatically during video output.
Selecting the Video Output Signal Mode
Your camera supports both NTSC (used in U.S., Japan, and other
countries) and PAL (used in Europe and other areas) video output
signal systems. The video sysetem you should use depend on the
contry of origitn of the equopment you are connecting to the camera’s
VIDEO OUT terminal.
Downloading Images to a Computer
There are two ways to download images taken with the camera to a computer.
- Directly from the SD card.
- Connect the camera to a computer via the USB cable.