VMware GSX 3 - Manual (Page 222)

www.vmware.com
222
VMware GSX Server Administration Guide
Installing Novell Clustering Services on the Cluster Nodes
Complete the following steps to install Novell Clustering Services in each virtual
machine.
1. Power on the first node virtual machine (Cluster1).
2. Boot into DOS by pressing the F5 key to bypass running the startup files.
3. Insert the driver floppy disk in the host's floppy drive.
4. Copy the drivers to the c:\nwserver directory.
5. Remove the driver floppy disk from the host's floppy drive.
6. Reboot the virtual machine.
7. The server should be able to recognize the shared disks. You may verify that by
running List Devices.
Repeat the above steps for the node 2 virtual machine (Cluster2).
Now you are ready to install the Novell Clustering Services (NCS) as you would
normally on two physical machines. Please refer to the NetWare 6.0 or 6.5 product
documentation for details.