Viper 5501 - Manual (Page 23)

23 © 2008 Directed Electronics. All rights reserved.
Timer mode
Command
: Press two-times and then .
Feedback

area. The parking lights flash 4 times fast to confirm.
Notes
: Enables or disables the remote start timer mode.
The system must be locked for the timer mode to operate. The system will start
EVERY
To activate timer mode with a manual transmission:
Enter the MTS mode. 1.
%XIT 2.
Enter the timer mode. The parking lights quickly flash 4 times to confirm 3.
ENTRY
To exit timer mode with transmitter:
Press s twice and then press . Parking lights flash slowly four times
CONlRMING
To exit timer mode without transmitter:
Make sure the remote start system is not operating the engine. 1.
4URN 2.
slowly four times.
4IMER
Note:
and, it can change the intervals between activations in timer mode.