Viper 5501 - Manual (Page 45)

45 © 2008 Directed Electronics. All rights reserved.
¢
(only after remote start is On.) The
remote beeps one-time.
¢ Ê To disable the remote start system
Move the shutdown toggle switch to the Off position.
Location of Shutdown Toggle Switch___________________
¢ Ê 6ALET
Press two-times and then The remote will beep once and the LCD
displays "valet" when enabled. When disabling the remote will beep twice
and the LCD displays "valet".
¢ Ê 6ALET
Before turning Off the engine, press and release the 1. button.
Then wait a few seconds.
Turn the ignition key to the Off position.
2.
%XIT 3.
The engine will remain running until the programmed time elapses
or a shut-down input is received.