VIEWSONIC XGA LCD PROJECTOR pjl9371 - Manual (Page 51)

PJL9371 ViewSonic 46
OPTION menu
Item Description
SERVICE
(continued)
KEY LOCK
Using the ▲/▼ cursor buttons turns on/off the key lock feature.
When the ON is selected, the buttons on the projector except the
STANDBY/ON button are locked.
ON ó OFF
• Please use this function to prevent tampering or accidental
operation. This function does not have any effect on the remote
control.
REMOTE FREQ.
(1) Use the ▲/▼ cursor button to change the projector's remote
sensor frequency setting.
1:NORMAL ó 2:HIGH
(2) Use the ◄/► cursor button to change
the projector's remote sensor on or off.
ON ó OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to be
on. If the remote control does not function correctly, disable either
of them.
It’s not possible to disable both options at the same time.
INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”.
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock
function is working.
• The “SCART RGB” message means the COMPONENT port
is working as a SCART RGB input port. Please refer to the
COMPONENT item in INPUT menu.
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT
is displayed together with the input information in the
INPUT_INFORMATION box.
FACTORY RESET
Selecting the OK using the ► cursor button performs this function.
By this function, all the items in all of menus will collectively return
to the initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE, FILTER MESSAGE and SECURITY settings are not
reset.
CANCEL ð OK