VBrick Systems EtherneTV-NXG 2 - Manual (Page 13)

V B R I C K E T H E R N E T - N X G V O D Q U I C K S T A R T G U I D E V E R S I O N 2 . 0 . 0 E
C O P Y R I G H T V B R I C K S Y S T E M S P A G E 1 3 J U N E 2 3 , 2 0 0 4
2: Using the EtherneTV Media
Control
Server
Access the server
From a PC, enter the IP address or hostname to access the MCS.
Procedure (Version 1.0.0)
1. Browse to "http://<MCS-Location or server name>/admin.aspx"
2. Click "Media Control Server"
3. Enter User ID (admin) and Password (admin), click "Logon"
4. Click "Global Variables"
5. Make browser full screen (F11)
6. Scroll down to "DEFINE THE VBVOD-NXG SERVER PATH" and enter the new server IP
address or server name where noted.
7. Click “save”
8. Quit admin
CHAPTER two
EtherneTV-MCS Version 1.0.0
Version 2.0.0 is different