Setting up the projector, User’s manual projector – Vivitar DP1500 X User Manual
Page 12
EN-11
○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual
Projector
. ENGLISH .
Setting Up the Projector
1. Place the projector on a sturdy, level surface preferably within five feet of the computer
or video source.
Caution: Do not hold the projector by the lens. This can damage the lens.
2. Place the projector the correct distance from the screen. Use the following table
as a guideline. Alternatively, as a rough estimate for planning purposes, use this
guideline: For every unit (foot, meter) of screen width, the projector must be placed
(set back) two units from the screen. The optical zoom capability of the projector
allows an adjustment of 30 percent.
Distance between the
screen and the projector
Projection Size (Diagonal)
40”
50”
70”
100”
150”
200”
300”
Projection Distance [ft.]
5
7
10
14
20
27
41
Lens at WIDE position
Projection Distance [ft.]
7
9
12
18
27
36
54
Lens at TELE position
3. When replacing batteries for the remote controller, take the following precautions:
Do not recharge used batteries, or expose batteries to fire or water.
Replace batteries as soon as they run down. If the batteries leak, wipe away the
fluid with a soft cloth. If battery fluid gets on your hands wash them immediately.
Remove the batteries if you will not be using the remote controller for a long
period of time.