Vivitar DP1500 X - Manual (Page 4)

EN-3
○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual
Projector
. ENGLISH .
Safety Instructions
Always follow these safety instructions when setting up and using the projector:
1. Do not place the projector on an unstable stand or table.
2. Do not use the projector near water or sources of heat.
3. Use accessories only as recommended.
4. Use the type of power source indicated on the projector.
If you are not sure of the type of power available, consult your dealer.
5. Insert the projector’s three-pin plug into a properly grounded socket.
6. Do not handle the plug or projector with wet hands.
7. Always take the following precautions when handling the plug. Failure to do so
may result in shock, damage, or fire.
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extension cords, or power strips as this
may cause fire or electric shock.
9. Do not place the projector where the cord can be stepped on as this may result in
fraying or damage to the lead or the plug. Be alert to tripping hazard.
10. Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning the exterior of the projector. Do not use liquid or aerosol cleaners.
Ocular Hazards -
11. Never look directly into the projector lamp when it is on.
12. Do not position the projector to point directly into an audience.
13. Do not point the laser pointer at anyone, especially near their eyes.
Copyright 2003 - Vivitar Corporation www.vivitar.com
Rev 030819