VIEWSONIC S50/X50 - Manual (Page 26)

PICTURE 1 Menu
PICTURE 2 Menu
With the PICTURE 1 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
With the PICTURE 2 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
Item Description
COLOR BAL R Adjust Red Color Balance: Dark Light
COLOR BAL B Adjust Blue Color Balance: Dark Light
SHARPNESS Adjust Sharpness (for video/s-video): Clear Soft
COLOR
Adjust COLOR (for video/s-video/component video):
Dark Light
TINT Adjust Tint (for
video/s-video): Green Red
PICTURE1 Menu
Item Description
V POSITION Adjust Vertical Position (for
rgb): Up Down
H POSITION Adjust Horizontal Position (for
rgb): Left Right
H PHASE
Adjust Horizontal Phase (for
rgb/component video):
Right Left
• Adjust to eliminate flicker.
H SIZE
Adjust Horizontal Size (for
rgb): Large Small
• If the horizontal size adjustment is excessive, the image may not be displayed
correctly. In such a case, initialize H SIZE with the RESET button.
OVER SCAN
Select Over-scan Ratio (for
video/s-video/component video):
LARGE MIDDLE SMALL
• It is recommended to select SMALL to avoid flicker at the lower part of the
picture.
25
PICTURE2 Menu
Example : PICTURE1 Menu
(COLOR BAL R)
Example : PICTURE2 Menu
(V POSITION)
MENU
: SELECT
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
TINT
12
MENU
: SELECT
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION V POSITION
H POSITION
H PHASE
H SIZE
OVER SCAN
12