Vision Fitness X6750HRT - Manual

PINK BAG
BLACK BAG
HARDWARE INCLUDED
GREEN BAG
M8x12L Bolt
Quantity: 2
M8x25L Socket Head Bolt
Quantity: 4
M8 Lock Washer
Quantity: 4
Plastic Connector
Quantity: 4
End Cap
illustration not to scale
Quantity: 2
YELLOW BAG
500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551
toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373
www.visionfitness.com
©2008 Vision Fitness. All Rights Reserved. 3.08
AG18.49PRD
REV6
A s s e m b l y
G u i d e
X6750HRT
COMMERCIAL INCLINE ELLIPTICAL TRAINERS
26x36x2T Wave W asher
Quantity: 4
26x36x0.3T Wave W asher
Quantity: 2
25.5x38x1T Washer
Quantity: 2
Spacer
Quantity: 4
M8x55L Socket Head Bolt
Quantity: 2
8x16x1T Washer
Quantity: 2
M8 Nylon Nut
Quantity: 2
M5x15L Bolt
Quantity: 8
M8x25L Socket Head Bolt
Quantity: 8
M8 Lock Washer
Quantity: 8
M8x20L Panhead Bolt
Quantity: 4
BLUE BAG
HARDWARE INCLUDED
M10x55L Socket Head Bolt
Quantity: 2
M10 Nylon Nut
Quantity: 2
M5x12L Bolt
Quantity: 2 10x24.5x1T Washer
Quantity: 4
Zip Tie, Quantity: 1
8x16x2T Washer
Quantity: 4
X6750HRT
COMMERCIAL INCLINEELLIPTICAL TRAINERS
T o avoid possible damage to this Elliptical T rainer , please follow these assembly steps in the correct order . Before proceeding, find your
new Elliptical Trainer’ s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your W arranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Elliptical T rainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each bolt and screw as you assemble your Elliptical Trainer to preven t
loosening and noise. Also, during each assembly step, ensure that ALL bolts and screws are in place and partially threaded in b efore
completely tightening any ONE bolt orscrew .
6mm T-Shaped Wrench
Screwdriver
5mm L-Shaped Wrench
TOOLS & PARTS INCLUDED
PARTS BOX
Power Cord
Console Mast Bracket
Console Mast Cover
Accessory Tray
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
13mm Wrench
6mm L-Shaped Wrench
17mm Wrench
8mm L-Shaped Wrench
ORANGE BAG
M8x20L Socket Head Bolt
Quantity: 4 8.2x18x1.5T Arc Washer
Quantity: 4
M10 Lock Washer
Quantity: 4
M10x25L Socket Head Bolt
Quantity: 4