Vision Fitness T8500HRC - Manual

T8500 HRC TREADMILL
OWNER’S MANUAL SUPPLEMENT
Programming
The T8500HRC has built in heart rate control along with 6 programs from intervals to weight loss, each of the programs has nine
different levels. Use either the UP or DOWN arrows to choose the Heart Rate Control program. Press SELECT. The function light
“HR” will be flashing and “H 80” will show in the number screen. You can choose a target heart rate from 80 to 190 in 5 beat
increments by pressing the UP or DOWN arrows. Once your selected target level is showing in the number screen, press
SELECT. A set time of “34:00” will be flashing in the number screen. You may choose a time between 15 minutes and 99 minutes
by pressing the UP or DOWN arrows. When the time you choose is showing in the number screen, press Select. When you are
ready to begin press START.
*
For instructions on calculating your target heart rate refer to page 34 of the Treadmill Owner’s Manual. All other programming
instructions can be found on page 14 of the Treadmill Owner’s Manual.
* Please note there is a 5 minute warm-up period before program will make elevation Changes