VTech t2350 - Manual (Page 8)

www.vtechphones.com  GETTING STARTED
Installation
• The minute is flashing. Press or until the screen displays the correct minute Press SELECT.
• AM or PM is flashing. Press or to choose between AM or PM. Press SELECT
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life
• With the handset in idle (off) mode, press PROG
• Press or until the screen displays RINGER: and the current setting
• Press SELECT The current setting blinks, and you will hear a sample of the ring
• Press or to select RINGER: , 2, 3, 4 or OFF You will hear a sample of each ring tone
• Press SELECT
• In the event of a
power outage, or
if your phone’s
power cord is
unplugged, the
time setting will be
lost
If you subscribe to DSL service:
If you hear noise during conversations and/or your
caller ID features aren’t functioning properly, install
a noise filter to the telephone line between the base
unit and the telephone line jack Contact your DSL
provider to obtain a noise filter.
To single telephone jack (RJ11C)
Telephone line cord
Noise filter
(For xDSL users)