Document Outline

• FEATURES
• BEFORE USE
• INSTALLATION
• OPERATION
• OSD MENU FUNCTION DESCRIPTION
• MAINTENANCE
• TROUBLESHOOTING
• SPECIFICATIONS
• LIMITED WARRANTY
• Appendix
• For Your Records
• FEATURES
  • 1 High brightness for clear images in any settings
  • 2 Whisper mode for quiet operation and extended lamp life
  • 3 Magnification feature allows selected parts of the screen to be magnified for closer viewing
  • 4 “My Screen” feature creates a customized start-up screen
• BEFORE USE
  • Package Contents
  • Component Names
    • Projector
    • Remote Control
  • Inserting the Batteries
    • 1 Remove the battery cover. Push the knob while lifting the battery compartment cover.
    • 2 Insert the batteries according to their plus and minus poles.
    • 3 Replace the battery compartment cover.
  • Attaching the Strap Handle
    • 1 Lift up the hook and pass one end of the strap through the hole of the handle hook.
    • 2 Buckle the end of the strap as shown on the right.
    • 3 Fix the other end of the strap to the other handle hook in the same way.
• INSTALLATION
  • Installation of the Projector and Screen
  • Screen size
  • [inches (m)]
  • a [inches (m)]
  • Min.
  • Max.
    • Angle Adjustment
    • Ports and Cables
  • Function
  • Terminal
  • Cable
    • Power Connection
    • Connecting Your Devices
    • Plug & Play
      • Connecting to a Computer
      • Connecting to a DVD Player or VCR
      • Connecting to a Display Monitor
• OPERATION
  • Power ON
    • 1 Check to be sure the power cord is connected correctly.
    • 2 Set the power switch to [I]. When the standby mode is selected, the POWER indicator is orange.
    • 3 Press the STANDBY/ON button on the control panel or the remote control device. The warm-up star...
    • 4 The POWER indicator stops blinking and turns green when the power is on.
    • 5 Remove the lens cap.
    • 6 Adjust picture size using the ZOOM Knob.
    • 7 Adjust focus with the FOCUS Ring.
  • Power OFF
    • 1 Press the STANDBY/ON button on the control panel or the remote control device. The message "Pow...
    • 2 The system goes into the Standby mode after cooling, then the POWER indicator stops blinking an...
    • 3 The POWER indicator is extinguished when power is off. Be sure to replace the lens cap.
  • Selecting an Input Signal
  • Adjusting Image Size and Focus
  • Adjusting the Volume
  • Temporarily Muting the Sound
  • Adjusting the Image Position
  • Using the Automatic Adjustment Feature
  • Correcting Keystroke Distortions
  • Using the Magnify Feature
  • Freezing the Screen
  • Signal Searching
  • Selecting the Aspect Ratio
  • Temporarily Blanking the Screen
  • Using the Menu Functions
  • Operating the PC Screen
    • PS/2, ADB, Serial Mouse Control
  • Available Functions
  • Remote Control Operation
    • USB Mouse Control
  • Available Functions
  • Remote Control Operation
• OSD MENU FUNCTION DESCRIPTION
  • Main Menu
  • Item
  • Description
  • BRIGHT
  • CONTRAST
  • ASPECT
  • PICT. POSIT.
  • GAMMA
  • LANGUAGE
    • Picture 1 Menu
  • Item
  • Description
  • COLOR BAL R
  • COLOR BAL B
  • SHARPNESS
  • COLOR
  • TINT
    • Picture 2 Menu
  • Item
  • Description
  • V POSITION
  • H POSITION
  • H PHASE
  • H SIZE
  • OVER SCAN
    • Input Menu
  • Item
  • Description
  • AUTO
  • VIDEO
  • HDTV
  • SYNC ON G
    • Screen Menu
  • Item
  • Description
  • BLANK
  • START UP
  • MyScreen
  • MyScreen Size
  • MyScreen Lock
    • Option Menu
  • Item
  • Description
  • VOLUME
  • AUTO OFF
  • WHISPER
  • LAMP TIME
  • FILTER TIME
• MAINTENANCE
  • Lamp
  • Lamp Life
  • Replacing the Lamp
    • 1 Switch the projector OFF, remove the power cord from the power outlet, then wait at least 45 mi...
    • 2 Prepare a new lamp.
    • 3 Check that the projector has cooled sufficiently, then gently turn it upside down.
    • 4 Loosen the screw as shown in the diagram, then remove the lamp cover
    • 5 Loosen the two screws, then gently remove the lamp while holding the grips. Touching the inside...
    • 6 Install the new lamp then tighten the two screws firmly. Also steadily push the opposite side o...
    • 7 Replace the lamp cover in position then tighten the screw firmly.
    • 8 Gently turn the projector right-side up.
  • Caring for the Air Filter
    • 1 Turn off the projector, then unplug the power cord
    • 2 To clean a reusable filter, carefully vacuum both sides of the filter area.
    • 3 If the filter is damaged and needs to be replaced, contact your dealer or ViewSonic Corp. Repla...
    • 4 To reset the Filter Timer, turn on the projector power, go to the Option menu then select filte...
  • Caring for the Inside of the Projector
  • Caring for the Lens
  • Caring for the Cabinet and Remote Control Transmitter
• TROUBLESHOOTING
  • On-Screen Messages
  • Message
  • Contents
    • Problem Diagnostics
  • Phenomenon
  • Cases not involving a machine defect
  • Items to be confirmed
• SPECIFICATIONS
  • Item
  • Specification
    • Outline Dimensions
    • Customer Support
  • Country/Region
  • Web site
  • T = Telephone
  • F = FAX
  • Email
• LIMITED WARRANTY
  • ViewSonic Projector
• Appendix
  • Power Cord Safety Guidelines
  • Cord Type
  • Size of Conductors in Cord
  • Maximum Current Rating of Unit
    • Compliance Information for U.S.A.
    • Compliance Information for Canada
    • Compliance Information for European Countries
    • User Information for All Countries