VXI BlueParrott B200 - Manual (Page 2)

Make/End A Call (If yellow light is not flashing on the headset turn headset on - see User Guide pg 14)
1. Put the headset on and position the microphone properly.
2. Put the headset in Talk Time mode*: Firmly press and release the multifunction button
on the headset for 1 second. The headset icon will light up on the right side of the
base (This may take 1-5 seconds).
3. Activate your phone by removing the handset from the cradle or by pressing the line
or headset button. If the dial tone is too loud when you activate your phone, you can press
the volume decrease button 1-3 times before activating the headset. Dial as usual.
4. To end the call, place the handset back in cradle, or press the line or headset button
on the phone to end the call.
5. To end Talk Time, press the multifunction button for 1 second. The handset icon will light
up on the base within 1-5 seconds.
* If the headset icon is already showing on the front of the base, then the headset is already in Talk
Time mode and you may proceed to step 3.
Adjust the Microphone Volume
The Microphone Volume Adjustment is located on the bottom of
the B200 base . If the person on the other end of the call is
having trouble hearing you, position the base as shown, and
with a paperclip inserted in the slot of the knob, turn the knob
clockwise to increase the volume. If they say your voice is too
loud, turn the knob counterclockwise to decrease volume.
Answer/End A Call (If yellow light is not flashing on headset turn headset on - see User Guide pg 14)
1. Put the headset on and position the microphone properly.
2. Put the headset in Talk Time mode*: Firmly press the multifunction button on headset
for 1 second, then release. The headset icon will light up on the right, front side of the base.
* If the headset icon is already showing on the front of the base, then the headset is already in Talk
Time mode and you may proceed to step 3.
3. Remove handset from cradle or press the line or headset button to be connected to the call.
VISUAL AND AUDIO INDICATORS EXPLAINED
B200 Quick
Start Guide
A brand of VXI Corporation
One Front Street. Rollinsford, NH 03869
800-742-8588 I 603-742-2888
PN201955B www.blueparrott.com
B200 Wireless Headset for Office
Phone Systems
4. To end the call, place the handset back in cradle, or press the line or headset button
on the phone to end the call. Press multifunction button for 1 second to end Talk Time.
The handset icon should will light up on the base within 1-5 seconds.
Adjust Speaker Volume
To adjust the volume in your earpiece, press the increase or decrease volume button for 1 second,
then release. Repeat until volume is at desired level.
201956B_B200QuickGuide.qxd 12/15/2005 10:40 AM Page 2