VIEWSONIC 3D SNAP 3DSC5 - Manual (Page 10)

4
1. Press the Record button ( ) to
start the recording.
2. During recording, you can move the
Joystick up/down ( ) to zoom in/out
. You can also press OK to pause or
resume the recording.
3. Press the Record button ( )
again to stop the recording.
Basic Operations
Recording a video clip
1. Move the Joystick up/down ( ) to
zoom in/out the image until a proper
scene is set.
2. Press the Shutter button ( ) to
take a photo.
Taking a photo
To avoid fuzzy photos, please hold the
camera steady or use a tripod.
In order to optimize the 3D effect,
the ideal shooting range is 1m~4m
(3ft~13ft), and you are advised to take
pictures with sufficient light.
When recording in a dark environment,
please use extra light source to
illuminate the subject.
When recording or shooting in 2D mode, only the right lens is activated.
This product utilizes the “Parallax Barrier” 3D technology. The parallax barrier is a
special layer placed in front of the LCD screen. In 3D mode, it allows each of your eye
to see a different set of pixels on the screen (hence the 3D effect). The brightness of
the screen seems to be halved in 3D mode.
Press this button ( ) to switch 2D/3D mode.
Also, the image showing on the LCD screen will
become 2D/3D. Pressing this button in playback
can change the 2D or 3D files store in your camera
or memory card. Please note that 3D files cannot
be recorded/viewed/deleted in 2D mode, and vice
versa. The 2D/3D files are stored separately.