VIEWSONIC 3D SNAP 3DSC5 - Manual (Page 9)

3
Powering On or Off
If the unit cannot be powered on, please check the followings:
1) The battery is correctly loaded;
2) The loaded battery has enough power.
Please make sure the camera is powered off before you open the battery cover, for
the battery will eject automatically.
Reading screen icons
Battery life:
: full : moderate
White balance mode
: auto : sunny
: cloudy : fluorescent
: tungsten
Flash mode
: off : auto : on
Zoom bar
T : Zoom in
W : Zoom out
Recording mode:
: 2D
: 3D
Self-timer status:
: off
: on
Menu button indicator (Push the joystick to
the right to enter the Menu setting)
Preview mode icon
Storage:
: internal
: memory card
Setting Language
1. Push the Joystick to the right ( ) to bring up menu.
2. Select the “Language” item and Press OK.
3. Move the Joystick up/down ( ) to select your local language, then press OK
to confirm.
1. Power on: Press the POWER button to turn on the camera, and the power
indicator lights green.
2. Power off: Press and hold the POWER button until the power indicator is
extinguished.
: low : empty