Viper 5301 - Manual (Page 26)

18 © 2011 Directed Electronics. All rights reserved.
To change the Car to be operated:
Press/hold the button for 3 seconds or until the remote beeps and the
and/or
1
3
4
5
6
2
A U X
LEDs turn on. This indicates which car the remote currently oper-
ates.
• Car 1: 1 beep and Lock LED on
• Car 2: 2 beeps and Lock & Unlock LEDs on
Note: Using the 1- way companion remote, the amber LED flashes and beeps
once for Car 1. The amber LED flashes and beeps twice for Car 2.
To change Car while the LEDs are On:
1. Press and release the button. The LEDs will change to indicate the car
that can be operated.
2. After you select the car number, press any command button to oper-
ate the features. The selected car remains selected until the setting is
changed.