Vestax PMC-07ProISP - Manual (Page 4)

3
15. Damage Requiring Service-Unplug this
product from the wall outlet and refer
servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled or objects have
fallen into the product.
c. If the product has been exposed to rain or
water.
d. If the product dose not operate normally
by following the operating instructions.
Adjust only those controls that are coverd
by the operating instructions as an
improper adjustment of other, controls
may result in damage and will often
require extensive work by a qualified
technician to restore the product to its
normal operation.
e. If the product has been dropped or cabinet
has been damaged.
f. When the product exhibits a distinct
change in perfromance-this indicates need
for service.
16. Replacement Parts-When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characterristics as the original parts.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
17. Safety Check-Upon completion of any
service or repairs to product, ask the
service technician to perfrom sefety checks
to determine that the product is in proper
operating condition.
18. Carts and Stands-The appliance should be
used only with a cart stand that is
recommended by manufacturer.
19. An appliance and cart combination should
be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
appliance and cart combination to overturn.
F E A T U R E S
The world's first quadraphonic (4channel)
output allows DJs to expand their
performance to 3D level.
Q-stick controls the dimension of each input
source amongst four speakers. The beats
and scratches fly around the room front,
back, left and right.
Effect send volume controls are provided to
each program. Effect return can be assigned
to each program or the master enabling
various flying effects. Effect return is also
equipped with a dedicated two band
equalizer.
Master trim volume lets DJs "Crab Scratch"
on master fader.
Crossfader and Inputfader status (reverse or
normal) is indicated in meter section.
Input jacks are provided specially only for
"SESSION IN" and "PHONO IN" which is
required by I.S.P.
A 3-band EQ is provided on each program.
The adjustment range(+6dB to -24dB)
enables equalization and frequency
elimination.
Vestax invented the crossfader reverse
switch and curve contorol and provided this
feature for input faders as well. All faders are
"photo coupler" to provide quicker response
and longevity.
Master / Cue select switch is provided to
enable monitoring of cue source or master
output signal.
Master output is equipped with balanced 1/4
inch connectors for accurate sound integrity
and durability.