Vestax PMC-07ProISP - Manual (Page 9)

8
HOW TO REMOVE THE TOP PANEL
Note
Use a plus driver fitting screw.
Caution: When you change any parts, do not
loose the screws with marking.
HOW TO CHANGE THE FADER UNIT
Top panel
Driver
Knob
Main panel
Driver
Insert the
multi-cable connector
QS - 07 ISP
Insert the
multi-cable connector
q Remove each fader knobs and 4 screws which
fix the top panel.
w Remove the top panel.
q Remove the two screws on the fader panel.
w Remove the fader unit from position in mixer.
e Carefully remove the multi-cable connector
from fader unit.
r Attach multi-cable connector to new fader unit.
t Position the fader unit carefully and secure with
screws.
HOW TO CHANGE THE Q-STICK UNIT
q Remove the three screws on the Q-stick panel.
w Remove the Q-stick unit from position in mixer.
e Carefully remove the multi-cable connector from
Q-stick unit.
r Attach multi-cable connector to new Q-stick unit.
t Position the Q-stick carefully and secure with
screws.
HOW TO CHANGE THE FADER UNIT