Vector AIRPRO VEC259 User Manual

Page 3

Advertising
background image

4

The compressor on/off switch controls operation of the compressor. It can be

conveniently depressed and released to control inflation. An exact pressure is obtained

by observing the gauge and releasing the trigger when the correct pressure is

achieved. For longer inflation operations, the trigger lock can be moved laterally to

lock the trigger in the ON position. Pushing the trigger lock to the opposite direction

releases the trigger and stops inflation.

2.

ADDITIONAL KEY FEATURES

• Trigger switch with lock to allow hands free operation

• Corded - includes a DC power adapter for use with standard 12 volt DC power

supply

• Battery pack includes non-spillable, maintenance-free, heavy duty, sealed,

high-density, lead-acid battery

• Requires no maintenance (other than recharging and cleaning) for optimum

operation

• Supplied 120 volt AC charger is Underwriter Laboratories (UL) safety tested and listed

• Battery charging LED on battery automatically activated during AC recharge

• Analog pressure gauge to 260 PSI compressor

• Nozzle hatch for storing nozzles in compressor

• 3 nozzles for inflator

FIGURE 2

CAUTION:

This battery pack is delivered in a partially charged state - you must fully charge

it before using it for the first time. Initial AC charge should be for 24 hours. Refer

to Section 6 for use of AC adapter and detailed charging instructions.

3

1.

INTRODUCTION

Congratulations on selecting the Vector AirPro™ Model VEC259 Compressor/Inflator

and

Lantern Light combo. This system is an advanced, high-pressure (up to 260 PSI),

multi-use air compressor system with unique features that set it far above the value and

utility of ordinary compressors for mobile use. It is supplied with a standard tire valve

chuck for filling auto, truck, bike, and motorcycle tires. Additionally, two different

adapters are supplied to inflate soccer balls, footballs, and popular inflatables. These

adapters are conveniently stored in a hatch in the compressor body. It is powered

from its own snap-on/off powerful battery, to be used anywhere it is needed. It can

also operate from a standard 12 volt DC electrical system found on: trucks, cars, boats,

airplanes, RVs and tractors, using the supplied DC power adapter. A supplied stan-

dard 120 volt AC charger recharges the battery when required. Typically, up to three

completely flat tires can be inflated before the battery pack has to be recharged.

The inflator and light share the battery pack and DC power adapter. The inflator

is used to inflate and deflate air beds, balls, rafts, etc. The lantern is versatile and

provides a spotlight, fluorescent area light, and emergency flasher.

Extra battery packs can be purchased, if completely cordless operation is required

(part VEC194). Operating these appliances with the DC power adapter is ideal for

use with Vector 12 volt DC cordless, portable, rechargeable DC power supplies, if

extended operating time in the field is required.

COMPRESSOR OUTLET

HOSE RETAINING RING

RIBBED BRASS FITTING

COMPRESSOR HOSE

TRIGGER LOCK

TRIGGER SWITCH

TIRE CHUCK

NOZZLE HATCH COVER

NOZZLE HATCH COVER

NOZZLES

PRESSURE GAUGE

Advertising