Victor LYT1037-001A - Manual (Page 12)

Master Page: Right
M2D7S-Sheet.fm Page 12
— 12 —
Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off
the camcorder.
When using Windows ® 98/98SE
1 Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor of
the camcorder.
● If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2
Double-click the [My Computer] icon on the desktop.
If the camcorder is connected to the PC correctly, the [Removable Disk] icon appears.
3 Right-click the [Removable Disk] icon in the [My Computer] window.
A menu appears.
4 Click [Eject] in the menu.
The [Removable Disk] icon disappears.
● If the icon does not disappear, wait for a while, and then proceed to step 5.
5
Disconnect the USB cable.
● If any message appears, click [OK].
6
Set the Power Switch on the camcorder to “OFF”.
The camcorder turns off.
When using Windows ® 2000/Me
1 Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor of
the camcorder.
● If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2
Double-click the [Unplug or Eject Hardware] icon in the status
bar.
The [Unplug or Eject Hardware] dialog box appears.
3
Select [JVC DV Camera Storage] or [USB Disk], and then click [Stop].
The [Stop a Hardware device] dialog box appears.
Disconnecting the USB Cable (Windows ® )
●●●● Windows ® 2000 ●●●● Windows ® Me
CONTINUED ON NEXT PAGE
M2D7S-Sheet.fm Page 12 Monday, January 28, 2002 3:00 PM