Victor LYT1037-001A - Manual (Page 9)

Master Page: Right
M2D7S-Sheet.fm Page 9
— 9 —
Connecting the USB cable
Connect the USB cable to copy still image and video clip files in a memory card to the PC or to use
ImageMixer in capturing video in real time.
1
To assure safety, make sure all units are turned off before making any connections.
2
Use the USB cable to connect the camcorder to the PC.
● We recommend that you use the AC Adapter.
NOTES:
● When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY
mode on the camcorder causes malfunctions of the PC.
● If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the
PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the
PC, not through the hub.
● Do not use an extension USB cable.
Connecting the DV cable
Connect the DV cable to use ImageMixer in capturing video from tape.
1
To assure safety, make sure all units are turned off before making any connections.
2
Use the DV cable to connect the camcorder to the IEEE1394 connector on the PC.
● We recommend that you use the AC Adapter.
NOTE:
When the DV cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY mode
on the camcorder causes malfunctions of the PC.
Connections (Windows ® )
To USB connector
PC
To USB connector
USB cable Camcorder
To DV connector
PC
To IEEE1394
connector
DV cable Camcorder
M2D7S-Sheet.fm Page 9 Monday, January 28, 2002 3:00 PM