Vita Spa Deluxe U -1 3 0 - Manual (Page 9)

WIRE YOUR SPA PER ONE OF THE DIAGRAMS MOST SIMILAR TO YOUR HOUSE
PANEL
ALL WIRES FEEDING THE SPA ARE TO BE THE SAME GAUGE. GROUND WIRES ARE
TO BE INSULATED AS WELL. WHEN USING A GROUND ROD, THE GROUND WIRE
TO THE ROD SHOULD BE #6 BARE COPPER.
ALL SPAS REQUIRE THE USE OF AN ISOLATED GFCI PROTECTED CIRCUIT. THE
INSTALLATION OF A DISCONNECT IS REQUIRED NO MORE THAN TEN (10) VISU-
AL FEET FROM THE SPA AND NOT LESS THAN FIVE (5) FEET.
THIS REQUIREMENT IS TO ASSURE THAT WHEN POWER IS DISCONNECTED FROM
THE SPA, POWER CAN NOT BE INADVERTENTLY TURNED BACK ON.
ELECTRICAL REQUIREMENTS AND INSTALLATION
SEPARATE NEUTRAL & SOLID GROUND
— 7 —