VTech 20-2481 - Manual (Page 21)

21
ENHANCED MODE
Your GIGAPHONE has an enhanced feature, designed to improve sound
quality and range. If you are using your GIGAPHONE in an area with
interference, the Enhanced Mode feature can help to improve both the sound
quality and operating range. Actual range will depend on your environment.
You can manually turn Enhanced Mode ON and OFF, or select AUTO mode.
To select the Enhanced Mode setting:
With the Handset in the idle (on hook) mode, press MENU.
Scroll to HANDSET SETTINGS, then press OK.
Select ON to enable Enhanced Mode. When the Handset is in use, an ‘ E ’
icon will appear in the upper left corner of the display, indicating that this feature
is active.
Select OFF to disable Enhanced Mode.
Select AUTO to allow your GIGAPHONE Handset to activate this feature
automatically, when conditions warrant it. Your 2-Line GIGAPHONE is preset
at the factory for AUTO mode.
Scroll to the desired setting, then press OK.
You can also activate Enhanced Mode from the Base Unit. In which case, all
registered Handsets will have the same Enhanced Mode setting. With the Base
in the idle (OFF) mode, press MENU, scroll down to SETUP BASE, press OK,
scroll down to ENHANCED MODE, press SET, scroll to the desired setting,
then press OK to confirm your choice.
NOTE : When Enhanced Mode is activated, your GIGAPHONE will consume
more battery power. This means the standby and talk time of your Handset(s)
will be shorter.
RENAME
Naming Your Handset(s)
You can personalize each Handset, giving it a name (Dad’s Phone, or Mary’s
Office, for example) instead of HANDSET 1, etc.
With the Handset in the idle (on hook) mode:
· Press MENU.
· Scroll to HANDSET SETTINGS, then press OK.
· Scroll to RENAME, then press SET.
Handset and Base Settings
Basic Operation