ViewEra V140 - Manual (Page 3)

Product Features
 High contrast color TFT LCD display support resolution up to XGA
1024×768. @75Hz.
 Compatible VESA standards.
 Imbedded audio system provides sound performance.
 Power management system conforms to VESA DPMS standard.
 Support DDC 1/2B for Plug & Play compatibility.
 Advanced OSD control for picture quality adjustment.
 Detachable stand for wall-mounting application.
Screen cleaning techniques
 Gently clean the screen with a clean camel hair lens brush, or a soft,
clean, lint-free cloth, to remove dust and other particles that can scratch
the screen.
 Do not apply pressure to the screen surface when wiping it clean.
 Do not pour or spray any liquid directly onto the screen or casing.
Chemical cleaners have been reported to damage the screen or case of
the LCD monitor.
Page 2
Additional
 Read all of these instructions and save them for later use.
 Follow all warnings and instructions on the product.
 Product
♦ Do not cover block the vent holes in the case.
♦ Do not insert sharp objects or spill liquid into the LCD monitor through
cabinet slots. They may cause accident fire, electric shock or failure.
♦ Disconnect the power plug from the AC outlet if you will not use it for
an extended period of time.
♦ Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks.
♦ Do not touch the screen directly with your fingers. You may damage the
screen, and oil from your skin is difficult to remove.
♦ Do not apply pressure to screen. The LCD is very delicate.
 Power
♦ Use the type of power indicated on label.
 Plugs
♦ Do not remove any of the prongs of the monitor’ s three-pronged power
plug.
♦ Disconnect the power plug from the AC outlet under following
conditions：
 If you will not use it for an extended period time.
 When the power cord or plug is damaged or frayed.
 If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions. Improper adjustment of other
controls may result in damage and will often require extensive work
by a qualified technician.
 If the product exhibits a distinct change in performance, service may
be required.
Page 3