VocoPro RECODE-1 - Manual (Page 15)

15
Recording with the RECODE-1
The RECODE-1 has 512 MB of internal memory
that will provide approximately 8 hours of available
time (128 kbps).
1. Power on the RECODE-1 by holding the POWER
button, hold until POWER LED lights up
2. Ensure that the RECODE-1 is connected to your
source via the included 1/8” to RCA cable
3. Hold the RECORD button to initiate recording
mode, the RECORD INDICATOR will blink, and
then press PLAY to start recording.
4. Stop the recording with the STOP function and
power the unit OFF.
• Your source will be recorded as a 128
kbps Mp3 file. If the memory limit is reached
before recording is manually ended, the
RECODE-1 will stop recording and automati-
cally save your file. It is recommended that
you replace the battery before beginning a
new recording session.
If additional memory is required, utilize expandable
SD Memory Card (Not Included)