Interface descriptions, Verizon one user guide, Home networking – Verizon One User Manual
Page 117
© 2006 Verizon
Verizon One
User Guide
117
NAME
Fax (fax, phone,
answering machine)
DSL/Phone
Reset
Ethernet
(E1/WAN, E2, E3, E4)
12V DC
On/Off
20.3.3 Interface Descriptions
The following chart explains the interface components located on the back of
Verizon One:
TYPE
6-pin RJ-11 modular jack
6-pin RJ-11 modular jack
Push Button
8-pin RJ-45 modular jack
Barrel power connector
Power Switch
FUNCTION
Connects standard telephony equipment to the
Verizon One
Base Unit.
Note: For convenience, this jack has a built-in microfilter for filtering ADSL
signals from standard telephone equipment.
Connects the
Verizon One
Base Unit to an ADSL equipped telephone jack for
DSL/Internet services.
Resets the Communications Subsystem settings to factory default settings.
Connects the Ethernet device(s) to the PC.
Note:
When using the WAN/E1
port, Ethernet LAN connection is limited to E2, E3, and E4. The WAN/E1
feature is used when installing
Verizon One
without DSL. The default setting
is DSL on WAN/E1 off.
12V DC Power Adapter provides the power source for
Verizon One.
Controls power on/off of the Base Unit.
QUANTITY
1
1
1
4
1
1
20. Home Networking