VXI Powerline Amplifier - Manual (Page 5)

VXI TuffSet Powerline Amplifier – Instruction Guide
5
STEP 6:
Place a Call
Adjust microphone volume until the other party can hear you
clearly and hear minimal background noise (Figure 7).
STEP 7:
Adjust Receive Volume
Adjust the receive volume control by sliding the wheel until you can
comfortably hear the other party (Figure 8).
STEP 4:
Setting the Mute Switch
To activate the headset microphone, rotate the mute
switch forward so the green box on the switch is
showing (Figure 5). Note: If the red box on the switch
is showing, your microphone will be muted.
STEP 5:
Setting Compatibility Switches
1. Place headset on head
2. Take phone off of the hook
3. If you do not get a clear dial tone, locate the compatibility
switches below the top door and adjust the switches in the
following order as depicted in Figure 6:
-A4 through A1
-B4 through B1
Try all switch positions. Choose the setting with the
best dial tone. Proceed to Step 6 to place a test call to
ensure that your settings also provide the clearest
voice.
Figure 5
Figure 6
Figure 7
Figure 8