Verizon MiFi 2200 - Manual (Page 21)

Connecting in Wi-Fi Mode the first time:
Access MiFi Settings
Ov v
After V anager and the device drivers have been installed on your computer, you
ma
00 must be
ade via Wi-Fi.
MiFi 2200 in Wi‐Fi Mode
(No cable)
No T iFi 2200 in Wi-Fi mode
for
Wh y
press t
• The MiFi 2200 is powered as soon as you press the power button and the Power LED
e MiFi 2200 is powered and has been activated, it automatically connects to the
alAccess service is available and one or
• The 3G Status LED in e
er iew
ZAccess M
y elect to use the MiFi 2200 in WiFi Mode.
The Web-based User Interface (shortened to Web UI in most of this document) is used to
configure the MiFi 2200 while it is in “Wi-Fi” mode. In this mode, there is no USB connection
from your host computer to the MiFi 2200, and the connection to the MiFi 22
m
How to Connect the
USB
te: he battery must be fully charged in order to use the M
the first time. (See Page 13 Setup: Wi-Fi Modem: Battery Use).
en ou connect the MiFi 2200 in Wi-Fi mode, the following should occur once you
he power button:
lights up.
• Once th
Internet as long as Mobile Broadband / Nation
more Wi-Fi devices are connected with MiFi.
dicator on the device lights up and blinks according th
connection speed.
21