Vector AIRPRO VEC258 - Manual (Page 3)

4
The compressor on/off switch controls operation of the compressor. It conveniently is
depressed and released to control inflation. An exact pressure is obtained by observing
the gauge and releasing the trigger when the correct pressure is achieved. For longer
inflation operations, the trigger lock can be moved laterally to lock the trigger in the
ON position. Pushing the trigger lock to the opposite direction releases the trigger
(OFF) and inflation stops.
2. ADDITIONAL KEY FEATURES
• Trigger switch with lock to allow hands free operation
• Corded-includes a DC power adapter for use with standard 12 volt DC power supply
• Battery pack includes non-spillable, maintenance-free, heavy duty, sealed,
high-density, lead-acid battery
• Requires no maintenance (other than recharging and cleaning) for optimum
operation
• Supplied 110 volt AC charger is Underwriter Laboratories (UL) safety tested and listed
• Battery charging LED on battery automatically activated during AC recharge
• Analog pressure gauge to 260 PSI compressor
• Nozzle hatch for storing nozzles in compressor
• 3 nozzles for inflator
FIGURE 2
CAUTION:
This battery pack is delivered in a partially charged state - you must fully charge it
before using it for the first time. Initial AC charge should be for 10 hours. Refer to
Section 6 for use of AC adapter and detailed charging instructions.
3
1. INTRODUCTION
Congratulations on selecting the Vector AirPro™ Model VEC258 Compressor &
Lantern Light Combo. This system is an advanced, high-pressure (up to 260 PSI), multi-
use air compressor system with unique features that set it far above the value and util-
ity of ordinary compressors for mobile use. It is supplied with a standard tire valve
chuck for filling auto, truck, bike, and motorcycle tires. Additionally, two different
adapters are supplied to inflate soccer balls, footballs, and popular inflatables. These
adapters are conveniently stored in a hatch in the compressor body. It is powered
from its own snap-on/off powerful battery, to be used anywhere it is needed. It can
also operate from a standard 12 volt DC electrical system found on: trucks, cars, boats,
airplanes, RVs and tractors, using the supplied DC power adapter. A supplied stan-
dard 110 volt AC charger recharges the battery when required. Typically, up to three
completely flat tires can be inflated before the snap-on battery has to be recharged.
A separate lantern light shares the battery pack and DC power adapter. The light is
versatile and provides a spotlight, fluorescent area light, and emergency flasher.
A customer can purchase extra snap-on battery packs if completely cordless operation
is required (Part VEC194). Operating these appliances with the snap-on DC power
adapter is ideal for use with Vector 12 volt DC cordless, portable, rechargeable DC
power supplies, if extended operating time in the field is required.
FIGURE 1
COMPRESSOR OUTLET
HOSE RETAINING RING
RIBBED BRASS FITTING
COMPRESSOR HOSE
TRIGGER LOCK
TRIGGER SWITCH
TIRE CHUCK
NOZZLE HATCH COVER NOZZLE HATCH COVER
NOZZLES
PRESSURE GAUGE
VEC258 Manual 3/03.qxp 1/23/07 5:18 PM Page 3