Vinotemp VT-26 - Manual (Page 10)

WINE RACK REMOVAL / INSTALLATION
To prevent damaging the door gasket, make sure to have the door
all the way open when pulling shelves out of the rail compartment.
To remove a rack from the cabinet:
1. Remove any bottles stored on the rack.
2. Remove the stopper from each side and gently pull up on the rack,
then take out the rack. (See figure 1)
To insert a rack in the cabinet:
1. Gently push the rack into sliders. (See figure 2)
2. Install the stopper to fix the rack into position.
NOTE: As there is a rack equipped with LED indicator. We advice
you do not remove this rack.
10
W W W . V I N O T E M P . C O M