VIEWSONIC VS13647 - Manual (Page 44)

ViewSonic Pro8400 40
About AP and Infrastructure modes
In AP mode, you need to use your computer's wireless connection utility to search for
the
!projector's SSID and connect to it. Then you can search for the projector with
vsPresenter.
In Infrastructure mode, you should connect both your computer and projector to the
same
!AP router and make connections with the IP address.
The following diagram describes how to access the Internet in AP and Infrastructure !
modes.
Important
„ If you need more information about AP and Infrastructure modes, please
refer to user documentations for Wireless Routers which are usually
available on 3C stores.
(AP mode)
Internet
(Infrastructure mode)
Internet