Preparing your lcd hdtv for wall mounting – Vizio VX52L User Manual
Page 6
VIZIO VX52L FHDTV10A User Manual
Version 1/8/2008
6
www.VIZIO.com
Preparing Your LCD HDTV for Wall Mounting
The VIZIO VX52L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing. If
you choose to mount the VX52L FHDTV10A on the wall, please follow the instructions below for removing
the stand base.
To find the perfect mount for the VIZIO VX52L FHDTV10A, browse VIZIO’s certified mount selection at
IOCE (888-849-4623).
To remove the stand base
Unplug all of the cables and cords from your VX52L FHDTV10A.
Place the VX52L FHDTV10A face down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent any damage to the TV.
Pull the stand cover off by squeezing the sides to release the
retaining plastics tabs.
Remove the six (6) screws (screws’ specs: M5, 1.0 Pitch,
15mm) so that the stand base can be removed.
Gently remove the stand base.
Now, the VX52L FHDTV10A can fit securely to a mount (sold
separately) by utilizing the mounting holes in the center of the
back panel of the TV. Please make sure to read the
instructions of your specific mount to properly hang the VX52L
FHDTV10A.
The pitch of the mounting holes is 600mm horizontally and
200mm vertically.
The screw type required is metric M8, 1.25mm pitch. The
length of the screws will depend on the thickness plate being
attach to the TV set, our brackets come with 25mm long
screws.
To find the perfect mount for the VIZIO VX52L FHDTV10A, browse VIZIO’s certified mount selection at
or call directly 888-VIZIOCE (888-849-4623).