Chapter 1 basic controls and connections, Front bezel, Right side panel controls – Vizio VX52L User Manual
Page 9: 1 front bezel, 2 right side panel controls
VIZIO VX52L FHDTV10A User Manual
Version 1/8/2008
9
www.VIZIO.com
Chapter 1
Basic Controls and Connections
1.1
Front Bezel
POWER ‘VIZIO’ LIGHT – The VIZIO name
lights white when powered on and orange when
powered off.
REMOTE CONTROL SENSOR – This is the
window through which all of the remote control
signals pass to the sensor. Point the remote
control directly at this window for the best
response to the remote signal.
1.2
Right Side Panel Controls
POWER (
) – Switch the VX52L FHDTV10A on by pressing the button
once. Press the button again to the VX52L FHDTV10A off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will return to the previous menu level.
CHANNEL ▲/▼ – Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons function as up and down controls in
the OSD menus.
VOLUME ◄/► – Use these buttons to increase or decrease to the speaker
volume. While the OSD is active, these buttons function as left and right
controls in the OSD menus.
INPUT (ENTER) – Repeated pressing of this
buttons steps through the input sources in the
following sequence: TV, AV1, AV2 (S-Video or
Video), Component 1, Component 2, RGB,
HDMI1, HDMI2, and HDMI3. Once you have
stepped through the entire sequence, you will
return to the beginning.
Additionally, when the OSD is active, this
button confirms the menu function to be
adjusted. When the OSD is not active,
pressing this button will display the current
input mode.