VIEWSONIC VS13920 - Manual (Page 16)

NMP-640
The BIOS Setup is accessed by pressing the <DEL> button after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins. Once you enter the BIOS
Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System
Over-view information and allows you to set the System Time and Date. Use the “←” and “→”
cursor keys to navigate between menu screens.
MainMenu
►SystemTime
This item allows you to configure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to select
a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
►SystemDate
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
►SATA1/SATA2
While entering setup, BIOS auto detects the presence of SATA devices. This displays the status
of auto detection of SATA devices. Press [Enter] to see the detailed information of SATA device,
such as vendor, size, LBA mode and so on.
11