Vision Fitness ST770 - Manual (Page 13)

13
3
STEP
• Set the swing arm support (AC4)
against the remaining holes in the side of
the main floor support (AC1) and secure
using two bolts (M10x70), four flat washers
(10.2x22x2) and two nylon nuts (M10).
Secure the connection in front of the
weight stack with two bolts (M10x120),
four flat washers (10.2x22x2), and two
nylon nuts (M10).
• Place the dual pulley bracket (AG1) in
between holes on the swing arm support
(AC4) and the weight stack tower (AB1).
Use two bolts (M10x120), four flat washers
(10.2x22x2), and two nylon nuts (M10)
to secure the swing arm support side of the
bracket. Use two bolts (M10x140), four
flat washers and two nylon nuts, respectively,
to secure weight stack tower side.
PINK BAG
AC5 AC5
AB1 AB1
AC4 AC4
AC1 AC1
AG1 AG1
M10x120