Vision Fitness ST770 - Manual (Page 14)

4
STEP
• Slide the bracket of the arm pad support
(AC2) over the left floor support (AC5),
aligning the holes in both pieces. Make
sure the pad plate is facing forward of the
machine. See diagram for clarification.
Secure using two bolts (M10x75), four flat
washers (10.2x22x2), and two nylon nuts
(M10).
• Place the connecting brace (AG2)
between the arm pad support (AC2) and
swing arm support (AC4), aligning holes
on both sides. On the arm pad support
side, use two bolts (M10x70), four flat
washers (10.2x22x2), and two nylon nuts
(M10) to secure. On the swing arm support
side, use two bolts (M10x120), four more
flat washers, and two more nylon nuts.
• Take the main seat support (AC3) and
place over the remaining holes in the left
floor support (AC5). Connect using four
bolts (M10x75), eight flat washers
(10.2x22x2), and four nylon nuts (M10).
GREEN BAG
AC3 AC3
AC5 AC5
AC4 AC4 AC2 AC2
AG2 AG2
14