Volvo S60 - Manual (Page 97)

03 Your driving environment
Lighting
03
``
* Option/accessory, for more information, see Introduction. 97
NOTE
• The use of daytime running lights is
mandatory in Canada.
• Continuous high beams cannot be acti-
vated when the headlight switch is in
position
. High beam flash will
function in this position.
Active Bending Lights (ABL)*
Headlight pattern with the Active Bending Light
function deactivated (left) and activated (right)
When this function is activated, the headlight
beams adjust laterally to help light up a curve
according to movements of the steering wheel
(see the right-pointing beam in the illustration).
ABL is activated automatically 1 when the
engine is started.
The function can be deactivated/reactivated in
the MY CAR menu system under
My S60
Active Bending Lights or under Settings
Car settings Light settings Active
Bending Lights .
See page 133 for a description of the menu
system.
NOTE
This function is only active in twilight or dark
conditions, and only when the vehicle is in
motion.
If a fault should occur in the system, the symbol
will illuminate and a message will be displayed
as shown in the table.
Symbol Display Explana-
tion
Headlamp
failure
Service
required The system
is not func-
tioning
properly and
should be
inspected/
repaired by
a trained
and qualified
Volvo serv-
ice techni-
cian.
1 The factory default setting is on.