Vizio STRATA DP5000 - Manual (Page 31)

The Basics
Keystrip Labels
Strata CIX DP5000-series Telephone UG 02/08
15
Keystrip Labels
Available on 9 Line LCD telephone and 10 Button LCD Add-on Module
³ To program LCD Keystrip Labels
1. Dial
#9876
(or press the flexible
Program
button)
2. Press the
Speaker
button.
3. Press the button you wish to label.
4. Use the dialpad to enter the label.
5. Press the button labeled in step 3 to save the setting.
6. To label another button, repeat steps 3-5.
7. To exit User Programming mode lift the handset off-hook / on-hook.
Ring Tones
³ To set distinctive ringing
1. Press
#9876
to enter User Programming Mode.
2. Press a
Line
or extension button. The LED is steady green.
3. You can press
Hold
to switch between internal and external pitch. (Internal =
station calls within your system; external = outside line calls.)
4. Enter the two-digit pitch number (see Table 5 on page 16 ).
5. Press the same button that you pressed in Step 2 (
Line
or extension). Two beeps is
a confirmation tone and “DATA PROGRAMMED” displays on your LCD.
6. Lift the handset off-hook/on-hook to save settings.